Continue...

Brazing Fittings

INFINITY HOSE with brazing metric fitting

Brazing-Fitting
Part No DN A B D Minimum bending radius
for tube O.D. (mm) (mm) (mm) (mm)
CA1XXX 15 12 12 24 15
CA2XXX 15 16 15 24 15
CA3XXX 21 18 17 31 30
CA4XXX 21 22 19 31 30
CA5XXX 28 28 24 39 40
CA6XXX 38 35 30 49 80
CA7XXX 38 42 38 49 80
CA8XXX 54 54 48 69 110
XXX is the total lenght of INFINITY hose in cm (multiple lenghts of 10 cm)

INFINITY HOSE with brazing inch fitting^ to top

Brazing-Fitting
Part No DN A B D Minimum bending radius
for tube O.D. (inches) (mm) (mm) (mm)
CARXXX 15 1/2″ 12 24 15
CASXXX 15 5/8″ 15 24 15
CATXXX 21 3/4″ 17 31 30
CAUXXX 21 7/8″ 19 31 30
CAVXXX 28 1+1/8″ 24 39 40
CAWXXX 38 1+3/8″ 30 49 80
CAXXXX 38 1+5/8″ 38 49 80
CAYXXX 54 2+1/8″ 48 69 110
XXX is the total lenght of INFINITY hose in cm (multiple lenghts of 10 cm)

INFINITY HOSE with brazing metric fitting (with safety clamp)^ to top

Brazing-fitting-with-Safety-Clamp
Part No DN A B D Minimum bending radius
for tube O.D. (mm) (mm) (mm) (mm)
CB1XXX 15 12 12 24 15
CB2XXX 15 16 15 24 15
CB3XXX 21 18 17 31 30
CB4XXX 21 22 19 31 30
CB5XXX 28 28 24 39 40
CB6XXX 38 35 30 49 80
CB7XXX 38 42 38 49 80
CB8XXX 54 54 48 69 110
XXX is the total lenght of INFINITY hose in cm (multiple lenghts of 10 cm)

INFINITY HOSE with brazing inch fitting (with safety clamp)^ to top

Brazing-fitting-with-Safety-Clamp
Part No DN A B D Minimum bending radius
for tube O.D. (inches) (mm) (mm) (mm)
CBRXXX 15 1/2″ 12 24 15
CBSXXX 15 5/8″ 15 24 15
CBTXXX 21 3/4″ 17 31 30
CBUXXX 21 7/8″ 19 31 30
CBVXXX 28 1+1/8″ 24 39 40
CBWXXX 38 1+3/8″ 30 49 80
CBXXXX 38 1+5/8″ 38 49 80
CBYXXX 54 2+1/8″ 48 69 110
XXX is the total lenght of INFINITY hose in cm (multiple lenghts of 10 cm)

Brazing fitting assembling instructions^ to top

Once the copper tube of suitable diameter has been fitted in the brazing fitting, heat the two ends until the filler material begins to melt. Continue the brazing around the whole circumference of the brazing fitting.
1
2
3
Insert the copper tube Heat the two ends Start brazing around the whole circumference