Updating the air-hydraulic crimping unit QUADRA™ CRIMP
COLORNO, wholesale nba jerseys Italy – September 1st, 2010 – Presented to the market during the last edition of Chillventa 2008, participation it has found ?????? wholesale mlb jerseys much success, the proof of this success being the supply of units worldwide.
This is not a simple aesthetic revision of the machine, but an actual redesign work by adding a useful option, a foot wholesale mlb jerseys cheap nfl jerseys pedal control to activate the pneumatic press, and then to have the free use of both hands during the crimping.
The heart of the machine has been completely redesigned, providing a central Lite control unit for greater cheap nba jerseys DO’S accuracy during the crimping operation and immediate release of the dies when exact crimping diameter has been achieved. We did not change positive characteristics widely recognized as the 360° rotating head, the functioning simply using compressed air and the dies held Beach in the castle through magnets.
The most important updates are:
- Dies completely redesigned for a better crimping. It has also Hadiths been added on each die a marking (Q2, Q4, Q6) to better distinguish the set of dies to be Dank used for the capillaries crimper QUADRA™ DN2-DN4 or DN6
- Inspection plug with oil level dipstick control MIN MAX
- Quick couplers for slide a better connection cheap nfl jerseys to compressed air inlet and the foot pedal (optional)
- Possibility to have an optional foot pedal to activate the press. cheap mlb jerseys cheap mlb jerseys The pedal cheap mlb jerseys assembly is very simple, just removing the caps supplied to the press and linking the numbered ends fot the three pneumatic hoses to the corresponding pneumatic inlets.
- Stickers explaining the functioning of all parts of the machine.
- New manual, updated in its entirety, with extensive description of the machine operation and maintenance.
The new press is available in two versions. The sole press tool that keeps the RXA006 part number, or press tool + foot pedal with the part number RXA008.
If you are interested in buying the foot pedal separately, even after the purchasing of exhibiting the press, it is possible. The part number of the foot pedal accessory is RXB008.
Note: The optional foot pedal can be installed only on the new version of the press unit, being provided with a central internal control, missing in the old version of the press.
Our sales team is available to provide any further information you may require. Contact us at our e-mail address firstname.lastname@example.org